Shark Rocket Vacuum Wall Bracket - No Nails needed

This is made for and compatible with the Shark branded vacuums. It's not an official product of any company as we designed and made this ourself.   This may work with other vacuum brands and model as shown in the customer photos.

NOTE****: DO NOT BUY this if you intend to hang your vacuum from this, it will NOT support the weight.. please read entire description as this special design is only meant to cradle the vacuum as the vacuum is top heavy. sorry for the all caps, but people are not understanding our design. See how it's installed: https://youtu.be/j1EhAY_CXN4 These are sold individually. Bracket and Tool Brush holder are sold separately.

If you still need help on how to mount this properly, please go here: https://youtu.be/bqA7QFQdtvo

This product is for those vacuum which is top heavy and slides down when its leaned against the wall. This product stops it from sliding down. If you didn't have this issue, please do not buy the bracket, but consider only buying the tool rack wall mount to keep your tool brushes organized.

The Shark Rocket vacuum sucks up dirt really well. We love this vacuum. You know what else it sucks at? You guessed it, it sucks because it doesn't come with any wall mount OR brush holder. The MSRP for this model is about $330 and for that amount they expect you to remove the canister every time you use it and mount the canister on the stick to store it away. How about the 4 tool head and brushes? Just leave them on the floor so that they can get lost?

As they say, necessity if a mother of all inventions. We invented this "Wall Mount" for the vacuum and also invented the Tool Rack for all the brushes. We say "Wall Mount" because it's the typical verbiage to use for this type of application, but the vacuum does NOT mount on it; but it it's more of a Cradle action. This is a Wall Cradle so that the Vacuum can lean in it. This has several benefits:

Confirmed to fit the following vacuum 3" wide: (Thanks to those that left a review with pictures for others to see the compatibility)

- Shark Rocket IZ363HT

- Shark Cordless Pro

- Shark IZ562H

- Shark Rocket Pet Pro IZ162HC

- Cordless Shark Vertex

- Shark IX141

- BISSELL Pet Hair Eraser Lithium Ion Hand Vacuum

The following Shark Vacuum is a bit wider, you should choose 4" wide:

-Shark IX140 series

-Shark IZ140 series

-Shark MultiFlex cordless

The following looks like it'll fit, but not yet confirmed:

- Shark Rocket IZ361H

- Shark Vertex DuoClean PowerFins Cordless IZ440H

Bracket Features:

- No need to find a stud in the wall to drill into. We will include two Command Strip tape so that you can place on any wall without damaging wall

- It has holes so that you can nail/screw into wall (if you should need to, but this is unnecessary ..because....)

- Vacuum does NOT hang onto this bracket, so nails are not necessary because the vacuum for the most part is standing on it's own and this bracket is merely just cradling it, so hardly any downward force is applied, therefore the Command Strip tape is enough.

- No risk of damage to wall or vacuum, unlike the typical wall hook which constantly puts gravity pressure.

- Very easy to slide in and out; unlike the typical hook which is so small that you have to try multiple times to locate it in order to hang it.

- No need to take apart the canister to store it, saves time and frustration

- Has slot on the side to clip in the charging cable. (Fit may vary depending on cord size but it fits our cord )

- Choose between Right or Left side Bracket; depending on your wall space and storage orientation

- Compare this design with the typical dinky hanger that others are selling, which you'll need to screw and find a stud. Believe me, I'm a handy man as well and if you don't find a stud, after some time, your wall will have a hole, even if you use the drywall anchors. Theirs is $10 for a small plastic. While this is a bit more, you're getting more plastic and a superior design. We also sell those dinky hanger if you prefer to hang your vacuum.  See our related products

Pair our Wall Bracket with our Tool Rack / Accessory mount, available in two different sizes and layout; sold separately.  See our related products

How to order:

Choose your bracket and side direction in which the vacuum will be sliding into. It will be: Slide into Right or Slide into Left (see picture)

These are sold individually / separately.  This listing is only for the Bracket.  Need the tool brush holder, see our related products.

Choose any color you prefer.

Colors available: White, Black, Grey, Red, Blue, Silver, Bronze, Copper, Grass Green, Apple Green, Orange, Pink, Hot Pink, Purple, Yellow, Dark Yellow, Fluorescent Yellow, Brown, Maroon.

IMPORTANT: You are only buying the bracket and NOT the vacuum itself. MAKE SURE this fits your vacuum model. This design is meant to fit Shark IZ363HT Anti-Allergen Pet Power Cordless Stick Vacuum Self-Cleaning Brushroll, PowerFins, Crevice Tool, Dusting Brush, Pet Multi-Tool & Anti-Allergen Dusting Brush , also known as Shark Rocket. We purchased our vacuum at: https://smile.amazon.com/gp/product/B08FP95RQD

We sell other Shark vacuum stuff.. see our other product

Facts:

The bracket takes 7 hours to print

Some people reported that these are too expensive. We priced it fairly. As far as we know, since this is our own creation, we are the only seller selling these solution for the Shark vacuum. Other 3D print sellers establish a baseline of $6 per print hour. If we use that metric, no one would buy this. Shop around, On Amazon and elsewhere, you can see that other hanging solution that requires drilling is $20 already. Our Bracket itself has more plastic and takes lots of time to print so we believe it's fair for a unique solution. The tool rack, which uses even more plastic, we designed two styles to give you choices on the price. To repeat again, the Bracket and Tool Racks are sold separately. If you want the hanging version, don't buy this design. Save money and buy our hanging version; we priced that cheaper than anyone else; but we don't sacrifice on quality. Get it here: https://www.etsy.com/3DCustomThings/listing/1145333035

Some report that the 3M command strips do not hold. The 3M strip is a user variable in which we have no control. It works best on very smooth and solid surface such as a metal file cabinet or mirror, etc. If on a Dry sheet rock wall, the bumps and dust may affect it and the command strip may fall off. Also, minimize the handling of the product as oil from fingers can affect stickiness. In these situations, it's recommended to wipe clean before sticking or at least use a screw for assurance.

This is our own design and creation that's compatible with the Shark brand vacuums. It is not an official product from Shark.